Dauntless Retail Point-of-Sale (POS) Set Up

This guide walks you through the Sango point-of-sale (POS) terminal and printer set up. Follow the instructions to ensure correct function of both equipment and peripherals and to avoid potential damage.

POS terminal set up

Step 1 Remove side cover

Press the button on the back of the side cover and gently release and remove the cover at an angle.

Step 2 Plug in the ethernet (LAN) cable

Plug the network cable into the LAN shown below the USB 3.0 (blue USB) ports.

Step 3 Plug in the printer cable

Plug the printer cable into the USB port. Also make sure the printer’s power cord is connected and plugged into the power source.

Step 4 Connect the cash drawer cable to the Epson receipt printer

Important: Carefully plug each clearly marked cable end into the respective locations: cash drawer and Epson Receipt Printer.

If this is a retrofit, please contact Support for more information.

Step 5 Plug the scanner into the POS terminal

Plug the scanner USB into the POS terminal USB port.

Step 6 Connect the POS to the power outlet

Put the cover back on the POS and plug it into a power outlet with surge protection. Next press Power. Once the POS Login screen appears, you
can log on using code one (1).  

You might enjoy these related articles:

• Dauntless Retail Cashier Quick Start Guide
• Opening the POS for Cashier Shift Changes with Dauntless Retail
• Create a new button on a Dauntless Retail POS terminal